Loading... Please wait...

About BUILDCIRCUIT

BuildCircuit is an online store for selling electronics kits and components related to Arduino, Raspberry Pi, etc. We operate from Sydney, Australia.

We design and sell basic electronic kits and Arduino modules for all electronics enthusiasts.

hello@buildcircuit.com.au

Adafruit Silicon MEMS Microphone Breakout - SPW2430

US $5.70
SKU:
ADA-2716
Shipping:
Calculated at checkout
Current Stock:
Out of Stock
Out of Stock
This product is shipped from Sydney, Australia. Worldwide shipping available- we ship to USA, Canada, New Zealand, UK, EU and Non-EU countries.
Listen to this good news - we now have a breakout board for a super tiny MEMS microphone. Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they don't need a bias resistor or amplifier, its all in one! The SPW2430 is a small, low cost MEMS mic with a range of 100Hz - 10KHz, good for just about all general audio recording/detection.
 
This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. To keep the breakout small and simple, we only added a 3V voltage regulator (the microphone requires 3.3V DC) and filter capacitors. No additional opamp is included, the output peak-to-peak voltage has a 0.67V DC bias and about 100mVpp (peak-to-peak) when talking near the microphone, which is good for attaching to something that expects 'line level' input without clipping. The peak-to-peak can be as high as 1Vpp if there's a very loud sound. If you are If you need a microphone with adjustable gain or auto-gain control, check out our mic+amplifier options. If you need a higher peak-to-peak, a rail-to-rail op-amp and some resistors can get you boosted up!

 

 

Using it is simple: connect GND to ground, Vin to 3.3-5VDC. For the best performance, use the "quietest" supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the DC pin. The output will have a DC bias of 0.67V so when its perfectly quiet that's what you'll read, there's a little drift. If the audio equipment you're using requires AC coupled audio, you can grab the signal out of the AC pin, which has a 10uF capacitor in series.
 
The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the DC pin directly to the microcontroller ADC pin.
 
Product Dimensions: 15.8mm x 14.1mm x 2.9mm / 0.6" x 0.6" x 0.1"

 

Product Reviews

As we are getting few reviews for our products, we are displaying feedback from our store on Ebay. Please leave your feedback if you purchase a product from our store. Click on the image below to see all the recent feedback

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Information about shipping

BuildCircuit is a trustworthy online store established in Sydney, Australia. We have been maintaining our quick shipping service since we started the store in Turku, Finland(in 2012).

Shipping information for international customers

We ship our products to more than 45 countries using Australia Post. Our regular customers are from the USA, Canada and Europe. We are currently using four different shipping methods to ship the orders to international destinations. We request you to select 'Standard Post' or 'Registered Post' while checking out so that you can receive your package quickly.

We usually ship your orders within 1-2 days. Small orders are usually processed and shipped on the same day.

Shipping information for Australian customers

All the orders from Australia are shipped on the next day at 9.00AM. Orders with Express Australia Post are also shipped on the next day if your order is placed before 1.00PM. We provide tracking code for Standard, Registered and Express Post orders only.

Australia Post has never lost any package since we started our business in Ausralia. So, we request you all to buy with confidence.

Are we reliable ? How to know we are genuine sellers ? How is your payment safe ?

1. If you make a payment via Paypal and if we don't ship, you can open a case on Paypal and ask for refund. Paypal will be on your side and they will make full refund.

2. We have been selling on Ebay also and we are TOP RATED SELLER on Ebay. Please check our store: http://stores.ebay.com.au/buildcircuitstore

3. This is our SSL seal from GeoTrust. Please click on the seal


4. We have a popular blog www.buildcircuit.com and people from all over the world read our posts. We are seriously in the business, therefore, we WILL ship your orders

For International Customers: For registered and express post orders, you will receive a notification on your email after the package is landed in your country. Examples given below:

delivery-landedpost-landed

Find Similar Products by Category

Back to Top