Loading... Please wait...

About BUILDCIRCUIT

BuildCircuit is an online store for selling electronics kits and components related to Arduino, Raspberry Pi, etc. We operate from Sydney, Australia.

We design and sell basic electronic kits and Arduino modules for all electronics enthusiasts.

hello@buildcircuit.com.au

Infrared based music transmitter and receiver DIY Kit

AU $11.95
SKU:
COM-888
Shipping:
Calculated at checkout
Current Stock:
Out of Stock
Out of Stock

This product is shipped from Sydney, Australia. Worldwide shipping available- we ship to USA, Canada, New Zealand, UK, EU and Non-EU countries.

This is a very interesting project for beginners. We had made similar project several years ago and published on BuildCircuit.COM. Check out this page. In this project, music from an audio source can be transmitted wirelessly. 

There are two kits included in this package. One is transmitter and the other is a receiver. 

On the transmitter side:

On the transmitter side, music is fed to the circuit and it is transmitted to infrared LED via an amplifying transistor so that the audio signals can be transmitted as infrared rays. If you connect a speaker in place of the infrared LED, the kit would work as a simple amplifier. 

On the receiver side:

On the receiver side, there is a phototransistor working as an infrared receiver which takes the audio signals in the form of infrared and feeds to the audio amplifier LM386 and the audio amplifier amplifies the signal and consequently produces sound.

Assembly of this project is very straightforward. You can easily assemble this kit if you have basic knowledge in soldering.

How does it work ?

Specification:

Infrared transmitter:
Operating voltage: 12V- You can achieve reception up to 1 meter if you use 12V, Otherwise, 5V-9V would transmit about 300cm only.
PCB size: 19 * 25mm

Infrared receiver:
Operating voltage: 4 ~ 12V
Driver Speaker: 0.5W-10W Speaker 1
PCB size: 17 * 39mm

The schematics are given below:schematics1.jpg

Package Includes: All the Components required to build infrared based receiver and transmitter modules. 

Components for receiver : Altogether 16 components including PCB

1. 2 x 0.1uF ceramic capacitor- Code 104

2. 1 x 0.22uF ceramic capacitor- Code 224- The PCB has 223 printed on it instead of 224. It is a mistake by the manufacturer.

3. 3 x 100uF/25V electrolytic capacitor

4. 1 x 10uF/25V electrolytic capacitor

5. 1 x 5mm LED

6. 1 x 1K Ohm resistor

7. 1 x 620K Ohm resistor

620k.gif

8. 1 x Phototransistor

9. 1 x LM386

10. 1 x IC header for LM386

11. 1 x Two pin screw terminal

12. 1 x 9V battery connector

13. 1 x PCB

Components for transmitter : Altogether 11 components including PCB

1. 1 x PCB

2. 1 x Earphone Jack female- You can connect a speaker also

3. 1 x Infrared LED

4. 1 x 100uF electrolytic capacitor

5. 1 x 4.7uF electrolytic capacitor

6. 1 x S8050 transistor

7. 1 x 5mm LED

8. 1 x 0.01uF ceramic capacitor- Code: 103

9. 1 x 100 Ohm resistor

10. 1 x 51K Ohm resitor 

51k.gif

11. 1 x 9V battery connector

Accessories needed for this project ?

You will need a speaker for this project and a stereo jack to connect the transmitter to audio source. Make sure that you have these components. You can also buy the components from the following links:

1. Thin Speaker- Check out and buy now.

speaker2.jpg

2. Speaker jack- Check out and buy now

jack.jpg

Product Reviews

As we are getting few reviews for our products, we are displaying feedback from our store on Ebay. Please leave your feedback if you purchase a product from our store. Click on the image below to see all the recent feedback

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Information about shipping

BuildCircuit is a trustworthy online store established in Sydney, Australia. We have been maintaining our quick shipping service since we started the store in Turku, Finland(in 2012).

Shipping information for international customers

We ship our products to more than 45 countries using Australia Post. Our regular customers are from the USA, Canada and Europe. We are currently using four different shipping methods to ship the orders to international destinations. We request you to select 'Standard Post' or 'Registered Post' while checking out so that you can receive your package quickly.

We usually ship your orders within 1-2 days. Small orders are usually processed and shipped on the same day.

Shipping information for Australian customers

All the orders from Australia are shipped on the next day at 9.00AM. Orders with Express Australia Post are also shipped on the next day if your order is placed before 1.00PM. We provide tracking code for Standard, Registered and Express Post orders only.

Australia Post has never lost any package since we started our business in Ausralia. So, we request you all to buy with confidence.

Are we reliable ? How to know we are genuine sellers ? How is your payment safe ?

1. If you make a payment via Paypal and if we don't ship, you can open a case on Paypal and ask for refund. Paypal will be on your side and they will make full refund.

2. We have been selling on Ebay also and we are TOP RATED SELLER on Ebay. Please check our store: http://stores.ebay.com.au/buildcircuitstore

3. This is our SSL seal from GeoTrust. Please click on the seal


4. We have a popular blog www.buildcircuit.com and people from all over the world read our posts. We are seriously in the business, therefore, we WILL ship your orders

For International Customers: For registered and express post orders, you will receive a notification on your email after the package is landed in your country. Examples given below:

delivery-landedpost-landed

Find Similar Products by Category

Specification:

Infrared transmitter:
Operating voltage: 12V- You can achieve reception up to 1 meter if you use 12V, Otherwise, 5V-9V would transmit about 300cm only.
PCB size: 19 * 25mm

Infrared receiver:
Operating voltage: 4 ~ 12V
Driver Speaker: 0.5W-10W Speaker 1
PCB size: 17 * 39mm

The schematics are given below:schematics1.jpg

Package Includes: All the Components required to build infrared based receiver and transmitter modules. 

Components for receiver : Altogether 16 components including PCB

1. 2 x 0.1uF ceramic capacitor- Code 104

2. 1 x 0.22uF ceramic capacitor- Code 224- The PCB has 223 printed on it instead of 224. It is a mistake by the manufacturer.

3. 3 x 100uF/25V electrolytic capacitor

4. 1 x 10uF/25V electrolytic capacitor

5. 1 x 5mm LED

6. 1 x 1K Ohm resistor

7. 1 x 620K Ohm resistor

620k.gif

8. 1 x Phototransistor

9. 1 x LM386

10. 1 x IC header for LM386

11. 1 x Two pin screw terminal

12. 1 x 9V battery connector

13. 1 x PCB

Components for transmitter : Altogether 11 components including PCB

1. 1 x PCB

2. 1 x Earphone Jack female- You can connect a speaker also

3. 1 x Infrared LED

4. 1 x 100uF electrolytic capacitor

5. 1 x 4.7uF electrolytic capacitor

6. 1 x S8050 transistor

7. 1 x 5mm LED

8. 1 x 0.01uF ceramic capacitor- Code: 103

9. 1 x 100 Ohm resistor

10. 1 x 51K Ohm resitor 

51k.gif

11. 1 x 9V battery connector

Accessories needed for this project ?

You will need a speaker for this project and a stereo jack to connect the transmitter to audio source. Make sure that you have these components. You can also buy the components from the following links:

1. Thin Speaker- Check out and buy now.

speaker2.jpg

2. Speaker jack- Check out and buy now

jack.jpg

"> -->

Back to Top